SAE 100 R2 AT DIN EN 853 2SN

Parameter

Internal Hose: Snthetic rubber, extruded whole without joints, of uniform thickness.

Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions.

Reinforcement:2 steel wire spiral

Working Pressure: 80bar-415bar/1160psi-6017psi

Impluse Time: ≥200000times

Operating Temperature: From -40 to +100℃ (intermittent 120℃)，from -40 to +70 for water based fluids, from 0 to +70℃ hot air, Prolonged operation at extreme temperatures will reduce hoses life.

Recommended Fluid: Mineal and biological oils, glicol-water based, water, lubricants.

Fitting Type: 1. Ferrule: No-skive type DPF4T; 2. insert: DPX4XX(X: can choose)，

Flame Resistance: U.S. MSHA Approver & CHN MA Approver

Specification:

DN	Hose I.D			Wire O.D	Hose O.D	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight	Length
DN	Dn	mm	inch	mm	mm	MPa	psi	MPa	psi	mm	kg/m	metres
5	-03	4.8	3/16	11.1	13.4	41.4	6000	160	23720	89	0.32	50/100
6	-04	6.4	1/4	12.7	15.0	40.0	5800	160	22840	102	0.36	50/100
8	-05	7.9	5/16	14.3	16.6	36.0	5250	140	20000	114	0.45	50/100
10	-06	9.5	3/8	16.7	19.0	33.1	4800	132	18840	127	0.54	50/100
13	-08	12.7	1/2	19.8	22.2	27.6	4000	110	15720	178	0.68	50/100
16	-10	15.9	5/8	23	25.4	25.0	3630	100	14280	203	0.80	50/100
19	-12	19.0	3/4	27	29.3	21.5	3120	85	12280	241	0.94	50/100
25	-16	25.4	1	34.9	38.0	16.5	2400	65	9420	305	1.35	50/100
32	-20	31.8	1 1/4	44.5	48.3	12.5	1820	50	7174	419	2.15	20 to 40
38	-24	38.1	1 1/2	50.8	54.6	9.0	1310	36	5140	508	2.65	20 to 40
51	-32	50.8	2	63.5	67.3	8.0	1160	32	4560	635	3.42	20 to 40